Charged Plate Monitor CPM 8374B Set
Product information "Charged Plate Monitor CPM 8374B Set"
- Measurement of the effectiveness of ionizers and their offset voltages
- Measurement of the discharge time of a preselected voltage threshold value to a lower voltage value (standard +/- 1000 volts to +/- 100V)
- Measurement of the voltage potential on an integrated plate electrode (150 x 150 mm) using a built-in electric field meter
- Storage of measurement data in the CPM
- Dimensions: 15.2 x 15.2 x 15.2 cm (W x H x D)
- Complies with IEC 61340-4-7
The Charged Plate Monitor CPM 8374 measures the voltage potential on its integrated plate electrode. A timer function is used to determine the discharge time from a preselected voltage threshold value to a lower voltage value. A high-voltage unit and an electric field meter based on the field-mill-influence principle are integrated. This enables the necessary high input impedance of 1015 Ω to measure electrostatic voltage potentials and discharge times of air ionization units.
The device complies with the European EN 61340-5-1 and the American EOS/ESD S.3.1. The high-voltage unit is high-impedance isolated and therefore safe to touch.
Thanks to its compact design and battery operation, the CPM 8374 is ideal for mobile use in industrial areas, but it can also be operated in stationary applications thanks to its mains connection. The CPM 8374 is operated using just 2 buttons, is menu-driven and therefore very user-friendly. All set measurement parameters are shown on the two-line LCD display for better orientation. The measured positive and negative discharge times as well as the offset voltage are stored in the internal, non-volatile EEPROM memory and can be read out later via the serial RS 232 interface.
| Scope of delivery: |
|
| Dimensions | 152 mm x 152 mm x 152 mm (L x W x H) |
| Weight | 990 g |
| Display | Alphanumeric display 2 lines x 16 characters (100mm x 24mm) |
| PC interface | Serial interface for controlling the device functions and for measured value output (9-pin SUB D socket) |
| Power supply | Internal with battery block 7.2V / 1300mAh (permanently monitored) Operating time approx. 4 hours continuous operation with full battery, external with power supply 12V DC / 750mA |
| Charging time | Max. 14h |
| Power consumption | Approx. 150 mA in battery mode / approx. 600mA in mains mode |
| Automatic switch-off | If no button has been pressed, approx. 5 min. after end of measurement |
Also available as PRORENT rental device.