Frame for foot electrode FE-100 with starting edge
Product information "Frame for foot electrode FE-100 with starting edge"
The Verification Unit is used for regular validation of the PD-400 personal tester(EP0206024).
The tolerances and limit values of the PD-400 can be checked quickly and easily.
The following resistors are located between the test plug and the safety plug or the device connection:
| Fail Low | Pass Low | Pass High | Fail Low | |
| Wrist strap 35 MΩ | 680 kΩ | 816.0 kΩ | 31.8 MΩ | 38.2 MΩ |
| Footwear left 100 MΩ | 91 kΩ | 109.0 kΩ | 91.0 MΩ | 109.0 MΩ |
| Footwear right 100 MΩ | 91 kΩ | 109.0 kΩ | 91.0 MΩ | 109.0 MΩ |
Each individual mode of the 4 modes is tested by turning the rotary switch to the desired mode (Fail Low to Fail High). The corresponding measurement is then carried out with the contact pin.
Also available as a PRORENT rental device.
Zubehör
EP0206024-VH
EP0206050-VH
EP0206061-VH